A blog about motorcycles, motorcyclists, and motorcycle shops

Musings on riding and working on bikes, and observations as I travel and visits bikers, riders, motorcyclists, events and shops

Amazon

Showing posts with label ZX-6R. Show all posts
Showing posts with label ZX-6R. Show all posts

Sunday, May 17, 2020

Another inexpensive tool worth every penny

I've removed the rear wheel and tire from most of my bikes at least once. For the shaft drive Kawasaki Concours, it's an easy if somewhat cumbersome process getting the wheel back in place and everything lined up.

For my Harley-Davidsons it's a completely different problem. I can imagine it's the same for chain drive bikes, but I haven't owned one in a long time. Getting the wheel into place and the axle through is fairly easy, as a rear wheel without a gear drive attached is much lighter. But then the fun starts, getting the proper chain or belt tension and the rear wheel and axle aligned so the bike tracks properly.

What a PITA! Being cheap, I originally didn't buy an alignment tool-how hard could this be? Really hard, so I broke down and bought a simple tool.


Best $16 I've spent on a bike ever! Get the tension you need, use the tool to mark the distance on that side of the bike (yes, Harley Sportsters but the belt on the "other side"!), go to the opposite side, slide axle into alignment, tighten everything, check again, torque everything and go for a "test ride"!

Full Disclosure, I am an Amazon Associate and will receive a small percentage of sales made through the link.

Saturday, June 8, 2013

How to buy your first motorcycle, part three

So now the fun part (well, the first fun part) begins!

It's time to go shopping for your first motorcycle.  I have to admit, shopping for motorcycles, gear and parts/accessories is one of the few kinds of shopping I like to do!  Hopefully you've talked to some friends about their bikes, looked at a few (or alot) of bikes, and decided what general type of bike you want for your first motorcycle.  So now it's time to find that motorcycle that speaks to you.

I recommend two ways to shop for your bike.  Both of them work, and have satisfactory results depending on your personality and other purchasing habits.

First, you can go to dealerships and shop for models that you like.  Most larger towns have a multi-make dealership that sells a variety of imported makes, aka "metric bikes" and other dealerships that specialize in one make.  A Harley-Davidson dealership is likely nearby if you are considering a Harley as your first cruiser.  Most dealerships will allow you to look around, sit on bikes and talk with them to find out features, costs and pro's and con's of the bike you are considering.  They will likely have a variety of sizes in most styles, and probably have a few used bikes or bikes on consignment.  Because their reputation among motorcyclists depends on the product and service they sell, you should find well-maintained, clean bikes on the showroom floor, a trained service staff, and quality accessories (if maybe a little pricey) at the dealership as you shop for your first motorcycle.  You also will find a financing office (more on that in another post).  Some dealerships offer deals on the Motorcycle Safety Foundation New Riders course, which I highly recommend taking, or offer their own new rider school.  Buying from a dealer is one good option for buying your first motorcycle.

The second option is buying your first bike from a private party, either a friend or via want ads or the nearly ubiquitous Craigslist.  You can even buy a motorcycle off of eBay, but I wouldn't recommend doing so for your first bike.  If you go this route the bike may not be as clean and well-maintained as at a dealership, but could also be in outstanding condition.  If you don't know much about motorcycles or other mechanical things, if you go this route having a friend who has a motorcycle go with you to look at the bike is a good idea.  The advantage of buying from a private party is that you will likely pay less, and depending on why they are selling, possibly make another riding friend.  Many used bikes are sold because the previous owner is moving "up", has too many bikes (NEVER, lol!) or just wants a different bike.  Some sellers won't be interested in teaching you much about motorcycling, and their attitude may tip you off that the bike isn't that great.  Buying a friend's starter bike can be a good deal, especially if they are a safe rider and have an interest in you becoming a safe motorcyclist on their/your first motorcycle.

Have fun, and remember, don't give in to peer pressure and get the bike that speaks to you.  While you most likely won't own it more than a year or two, it will always have special memories as your first motorcycle!

Thursday, June 6, 2013

Picking out your first motorcycle

Today I'd like to talk about how to pick out your first motorcycle.  I've often felt that shopping for a motorcycle is also a lot of fun.  Not quite as fun as riding, but learning about motorcycles, visiting shops and looking at all the different bikes, and even sitting on a few is enjoyable.

It can also be very intimidating to buy your first motorcycle!  Many different models, expense, peer pressure, confidence in your ability to ride a motorcycle safely-all come into play.  So let me share a few things you should keep in mind when shopping for that first motorcycle.

First, understand while you will remember this bike forever, you won't own it forever!  Sure you can expect to spend anywhere from $1000 up to way more than you should for a first motorcycle (many bikes are over $10,000 now-a-days, with some approaching $25,000 or more), but that doesn't mean you have to own it for years and years unless you really like it.  You need to buy a bike you like and will be proud to ride, but don't think it has to be "the perfect bike" or even the dream bike. 

Second, watch out for peer pressure.  Your friends might all ride Kawahayazukida-Vicson's with tricked out chrome unobtanium after-market parts, and you may soon too, but right now you need a serviceable, safe motorcycle to get riding.  Later you can build the best bike in your ride group/club and win the Bike Night parking lot show, but that isn't what you are going after if you buy your first motorcycle right.  A "old school" Harley dealer once told me, "You want to learn how to wrench, buy this classic Ironhead Sportster.  You want to learn how to ride, buy a basic cruiser and ride it as much as possible for a year or two".  Great advice-even when it cost him a few thousand dollars when I walked away from buying a bike that needed lots of work.  Stylish and cool?  Oh yeah, but I wouldn't have ridden for months getting that "cool" ride back on the road.

However, the corrollary is also true-ask as many riding friends about their bike and why they have that style as you can.  First, they will like talking about motorcycles with you.  Also, that old-timer on the Gold Wing, Harley full dresser, or BMW super-sport tourer once started out just like you.  I just recently met a rider with 70,000 miles on a Hayabusa!  He knows exactly what that bike is capable of, but likely rode many a smaller sportbike before accomplishing a rare high mileage feat, and was easy to talk bikes with.  Some of us own multiple bikes of different styles, or have owned them, and can help you figure out if a standard, a cruiser, or a sport bike is best for you.

So what are those differences?  A "standard" bike, while not as common as they were, is your basic motorycle meant for transportation and general riding.  Once known as the "ubiquitous Japanese motorcycle" or UJM, these bikes had basic styling and parts, generally 750cc engines or smaller, and few accessories from the factory.  Many were customized for utility-the style for many years was to "acquire" a milk crate and strap it to the passenger seat or rack!  Kind of a reverse cool factor and quite functional.  Cruiser bikes are one of the two prevalent styles now and have generally replaced standards as the basic bike.  The seat is normally lower to the ground than other bikes, the feet are forward or just under the rider's knees, and the handlebars are higher than most other styles.  There is little bodywork, usually just fenders, a gas tank and maybe small side covers.  Windscreens can be added as can saddlebags, which can be handy and look better than a milk crate!  Sport bikes are the third general category to consider when buying your first motorycle.  These are the faired, "racing" bikes.  Handlebars are generally low (directly attached to the fork tubes in most cases), there is a small windscreen, and the rider is crouched over the bike as much as sitting on it.

All of these styles come in many sizes, and leads to the last piece of advice for today:  Don't buy too big a bike for your first motorcycle!  Re-read the paragraph above where I say you won't own this bike forever.  Even a 300cc sportbike (the smallest Ninja for example) and the basic cruisers (like the V-Star 250) are capable motorcycles and can do all legal speeds where a novice rider should be riding, including the freeway.   OK, if you weigh 225 pounds, and are going to put camping gear all over the bike, maybe not, but you probably figured that out already!  That also brings up safe loading and gross vehicle weight ratings, which really isn't the topic today anyway.

So think that through, and later we'll discuss shopping for this much-desired first motorcycle. 

Tuesday, March 20, 2012

Motorcycle maintenance update

Lots going on in "Millie's Garage" even if it's not going to be set-up like I want it to for a long while.

First, I sold the Kawasaki Ninja ZX-6R last week as I realized there was no way I was going to have time to get it back together.  Took a small loss on the bike, but enjoyed cataloging parts and what could have been.

The Sportster has sprung a fairly consistent and new leak, or at least "marking it's territory" from a new spot.  Going to have to chase that down, but it isn't coming from the engine block or heads, so it may be a failing oil line.  I've had that happen on another Harley-fortunately right after an oil change on the test run in Millie's Garage, so while messy was able to immediately shut the bike down.

And for the big shocker:  While listing the parts needed to service and hopefully get the Connie running again, I put the old battery on the charger.  Went online to Murph's Kits to look for parts and got the battery checked today since it wasn't taking a charge.  Battery is completely dead, and first estimate for a replacement is $90.  Here we go!  BikeBandit.com is running a maintenance sale, so I'll check them too.

Well, that's enough for today-hope some of ya'll are enjoying the ride today!

Thursday, February 9, 2012

Anyone shop at BikeBandit.com? Interested in their e-mail offers?

Bike Bandit is a local-to-me parts company.  Their business model is completely online and mail order, so although they are located in San Diego CA, I have never physically been to their "shop" but have bought a few things from them online.  So far my experiences have been good to great, and with them so close, shipping is practically overnight.  I have gotten parts as fast through the mail as I could have stopped by any storefront in San Diego, which I appreciate.

I have signed up for their e-mail alerts, and today received the attached offer: bikebandit.com e-mail promotion.  While I have plenty of jackets and vests, these are pretty good offers.  They have a wide variety of parts (both OEM and aftermarket), accesories and apparel.  I'll probably make one order to a specific Connie parts house for some hard to find parts, and a big order to BikeBandit when I get the Connie and the ZX-6R running again.

Tuesday, January 31, 2012

Upcoming Bike Night: Mira Mesa CA USA

It's been a long non-riding season out here in Southern California!  We've suffered through a terrible January where the average temp was probably 65 or more, so once again we've had no off-season.  Well, we sort of had a small break after all the Toy Runs and charity events leading up to Christmas, so it's time for the "first of the year" events.

The first Mira Mesa Bike Night is this Thursday at the Albertson's/Starbucks/Rubio's parking lot a long block off the I-15.  I would say it starts at 7 PM, but most folks don't show that early, and there is no real "official" starter from what I can tell the few times I've been in the past.  They have a facebook page: https://www.facebook.com/MMBikeNight and may be in meet-up, but I'm not familiar with that yet.

Hope to see some friends there, make some new ones, and see some cool bikes.  All bikes are welcome-I've seen everything from classic BMWs to some trick 'Busas and other sportbikes.

UPDATE:  Good time tonight at the MMBN.  Lots of diverse bikes, from mostly stock cruisers and sportbikes to some highly customized bikes, and a tricked out XR650 with 17 inch sportbike wheels and tires, a custom made tail rack, and a steering damper!  Got to see some guys I haven't in a while, plus meet some club members from different clubs and some independent riders too.  Hope to make it to more bike nights this year than last.

Friday, January 20, 2012

Winter Project Number Two: 1997 Kawasaki Ninja ZX-6R


A little while ago I picked up this 1997 Ninja ZX-6R off of Craigslist as a basket case pretty cheap.  It hasn't run in a while after being laid down on the track about five years ago.  Much of the bike is in baskets in my storage shed but I am missing a few parts.  Once I get the Connie running, I plan on chasing down the few parts I need, putting this bike on my lift and getting it re-assembled.  Then I'll have to decide if I want to keep it as a street bike, sell it to a racing or trackday riding friend, or even become a "Racing Team Owner" and have one of them campaign it for me either in WERA or Chuckwalla motorcycle racing.

Thoughts or suggestions on getting it running again welcome!

Tuesday, January 17, 2012

Updates coming soon!

Took a few days off, but will update the blog over the next few days with pictures of the Sportster and the project Ninja X-6R.  Will also get that list of previously owned bikes and maybe short reviews of them.

I'll also start adding some links, both to other blogs and newsgroups and a few vendors I have had good experiences buying parts and accesories from over the years.

Tuesday, January 10, 2012

Motorcycles I own

I currently own three bikes.  Unfortunately only one is running, so one theme of this blog will be repairs and refurbishing of the other two.   My bikes are an eclectic mix, so here's the list and status.

1999 Harley-Davidson Sportster XLH 883-running.  Customized with a friend, and has a one-offConcour sissy bar bent and welded by another friend.

1986 Kawasaki Concours-not running.  Parked a year ago and needs news radiator hoses and maybe a manifold to run, then a good tune-up.  Hope to get it running this Spring, and make it to 100k on that bike.

1997 Kawasaki Ninja ZX-6R-not running basket case.  Set-up as a track bike, hope to assemble and sell.

Next post I'll try to remember the previous bikes and list them.