I've removed the rear wheel and tire from most of my bikes at least once. For the shaft drive Kawasaki Concours, it's an easy if somewhat cumbersome process getting the wheel back in place and everything lined up.
For my Harley-Davidsons it's a completely different problem. I can imagine it's the same for chain drive bikes, but I haven't owned one in a long time. Getting the wheel into place and the axle through is fairly easy, as a rear wheel without a gear drive attached is much lighter. But then the fun starts, getting the proper chain or belt tension and the rear wheel and axle aligned so the bike tracks properly.
What a PITA! Being cheap, I originally didn't buy an alignment tool-how hard could this be? Really hard, so I broke down and bought a simple tool.
Best $16 I've spent on a bike ever! Get the tension you need, use the tool to mark the distance on that side of the bike (yes, Harley Sportsters but the belt on the "other side"!), go to the opposite side, slide axle into alignment, tighten everything, check again, torque everything and go for a "test ride"!
Full Disclosure, I am an Amazon Associate and will receive a small percentage of sales made through the link.
A blog about motorcycles, riding, motorcycle maintenance, customizing and working on bikes, bike rides I have done and bike shops I have visited while traveling. Oh yeah, it's about bikes.
A blog about motorcycles, motorcyclists, and motorcycle shops
Musings on riding and working on bikes, and observations as I travel and visits bikers, riders, motorcyclists, events and shops
Amazon
Showing posts with label motorcycles. Show all posts
Showing posts with label motorcycles. Show all posts
Sunday, May 17, 2020
Monday, October 23, 2017
Have you owned two of the same bike before?
Switched over from my 1986 Kawasaki Concours to a 1994 that I'm in the process of restoring.
While the 94 has some minor improvements, very little changed on these bikes for a 20 year run-amazing for Japanese makes in those days. That's more a Harley-esque trait, doing very little to a model year after year after year. For nearly 12 years, the only change was colors, and before that the only major change was a front end upgrade in the early 90s-better forks, brake calipers with dual pistons instead of only one, and a better looking fender.
But my point is I rode the 1986 over 30,000 miles, so when after a few month break I got on the '94, it was like not changing anything. I was planning on taking it easy for a tank or two, but found I was riding along naturally and smoothly.
I'd appreciate your comments-have you owned two models of the same bike, or very similar, and was riding both of them this familiar?
In the wind or in the air,
Bur
While the 94 has some minor improvements, very little changed on these bikes for a 20 year run-amazing for Japanese makes in those days. That's more a Harley-esque trait, doing very little to a model year after year after year. For nearly 12 years, the only change was colors, and before that the only major change was a front end upgrade in the early 90s-better forks, brake calipers with dual pistons instead of only one, and a better looking fender.
But my point is I rode the 1986 over 30,000 miles, so when after a few month break I got on the '94, it was like not changing anything. I was planning on taking it easy for a tank or two, but found I was riding along naturally and smoothly.
I'd appreciate your comments-have you owned two models of the same bike, or very similar, and was riding both of them this familiar?
In the wind or in the air,
Bur
Sunday, February 5, 2017
Quick Update on the 1994 Kawasaki Concours Restoration Project
I'm going to keep this short, but have to admit to owning the 1994 Connie for three years now! I'm nowhere near as far along on the restoration as I thought I would be. Fortunately my 86 had kept running well, so my plan to retire it at 100k was able to be pushed back. Now my plan is to get at least 100K more miles on it than the 94 has before the registration expires at the end of April.
By then I should have all the bodywork on the 94 ready to be repainted, and take it off it's PNO as soon as DMV sends me the paperwork, but effective in July when it's due to minimize fees. Since I also have a Harley, I will have a legal bike to ride while "swapping" Connie parts and awaiting the new registration for the 1994.
I tried starting it this weekend, but what little gas it has is stale. It fired on starting fluid but didn't run. I'll probably get a gallon of fuel and see what I can do to get it running, but I sure don't want to pull the carbs any earlier than I have to! What a PITA it is getting Connie carbs in and out!
By then I should have all the bodywork on the 94 ready to be repainted, and take it off it's PNO as soon as DMV sends me the paperwork, but effective in July when it's due to minimize fees. Since I also have a Harley, I will have a legal bike to ride while "swapping" Connie parts and awaiting the new registration for the 1994.
I tried starting it this weekend, but what little gas it has is stale. It fired on starting fluid but didn't run. I'll probably get a gallon of fuel and see what I can do to get it running, but I sure don't want to pull the carbs any earlier than I have to! What a PITA it is getting Connie carbs in and out!
Labels:
C10,
Concours,
Kawasaki,
motorcycles,
motorcyle maintenance
Saturday, January 28, 2017
Does the bike make the rider? Musings while riding
Like many motorcyclists, I've owned a number of bikes, and bikes from a variety of styles for road riding. From the Honda XL250 Enduro I got most my first miles on, to probably 6 or 7 cruisers, one or two standards, a vintage sportbike (Ninja 900, aka "the Top Gun bike"), 2 Kawasaki Concours sport tourers, and among the cruisers a Harley Sportster and a Street Glide.
Currently I have a ride one of the Concours and the Street Glide. Before that it was one of the Connies and a Sportster. So I had a fairly big sport-tourer and a Harley as my bikes for most the past decade.
What I noticed, especially if riding them back-to-back, or the next day, is I actually rode differently depending on which bike I was on. Not only did they handle differently (side note-the Sportster handled more like a sport-tourer than any other cruiser I've owned, and with good power-to-weight, it was one of the quicker bikes I've owned), I rode differently-often more aggressively on the Harleys. More attitude, more "this is my lane/space". That's not to say at times I have fully used the Connie's impressive roll-on speed, even as a 30 year old bike! But there is just something about being on the Harleys, at least to me.
Do you find yourself riding differently on different bikes if you own more than one? How about if you've switched styles? I'd love to read your comments about this!
Currently I have a ride one of the Concours and the Street Glide. Before that it was one of the Connies and a Sportster. So I had a fairly big sport-tourer and a Harley as my bikes for most the past decade.
What I noticed, especially if riding them back-to-back, or the next day, is I actually rode differently depending on which bike I was on. Not only did they handle differently (side note-the Sportster handled more like a sport-tourer than any other cruiser I've owned, and with good power-to-weight, it was one of the quicker bikes I've owned), I rode differently-often more aggressively on the Harleys. More attitude, more "this is my lane/space". That's not to say at times I have fully used the Connie's impressive roll-on speed, even as a 30 year old bike! But there is just something about being on the Harleys, at least to me.
Do you find yourself riding differently on different bikes if you own more than one? How about if you've switched styles? I'd love to read your comments about this!
Tuesday, December 29, 2015
3-Ride Review: Harley-Davidson Heated Jacket Liner
Good afternoon, loyal reader(s)!
It's time for another one of my very sporadic 3-Ride Reviews. Today I am reviewing a Harley-Davidson heated jacket. I'm not exactly sure of the model as it is an older one given to me by a friend probably a year and a half ago. I didn't immediately put the pigtail on the battery as last winter I wasn't riding as much as I plan on this winter due to a different job.
First, a description of the jacket. It's a black lightly insulated jacket with a windbreaker like exterior and wiring throughout-the front, back and sleeves are all wired. It zips all the way up to a closed neck (good) and has light elastic cuffs and bottom. There are plenty of extra plugs for gloves and probably heated pants liners too. On the inside left is a pocket that holds the lead to the wiring harness on the bike, and it had an on/off rocker switch when my friend gave it to me. The front outside right has a plasticized H-D patch that is tasteful and I could likely get off if I really wanted to (I no longer own a Harley) and the back center has a 1x2 inch or so Harley eagle and "AN AMERICAN LEGEND" patch sewn on. I'm not sure I'll ever run this jacket without some top layer, so these patches are no big deal.
My first ride in this jacket was Sunday morning, and it was 36 in my garage, 39 per the official weather app on the phone. Jacket warmed up quickly and I could feel the welcome heat at in town speeds. About 10 minutes later I was on the freeway and cruising along for about 25 minutes at California early morning freeway speeds-so plenty of cooling wind. I was wearing an Aerostitch suit, but the top zipper is malfunctioning and opened partway through the ride. No big deal, as the liner kept up and I never was chilled. Riding home at 10 AM I plugged in the liner, so test ride 2 was at more moderate temperatures-roughly high 40s/50ish. This time I had to cycle the liner a few times, as I kept the suit sealed and the liner generated more than enough heat.
Ride three was this morning. Again, the temperature was below 40 when I left the house. I kept the suit sealed better this time, and once I got off the freeway for the last ten minutes riding to work I kept the switch off. I was only wearing a light dress shirt under the liner and could really feel the heat after about a minute, and then for the rest of the ride.
This liner is an XL, which might be one size too big for me (I'm 5'10" and 180) but also allows easy layering under and above, which might not be possible if it was a large. Considering it was a gift, I'm quite happy with the size!
Pro's-plenty of heat, easy hook up to battery then one plug, quality construction
Con's-A bit extra wiring in leads (at least the way my bike is laid out), ripstop outer construction requires outer layer
It's time for another one of my very sporadic 3-Ride Reviews. Today I am reviewing a Harley-Davidson heated jacket. I'm not exactly sure of the model as it is an older one given to me by a friend probably a year and a half ago. I didn't immediately put the pigtail on the battery as last winter I wasn't riding as much as I plan on this winter due to a different job.
First, a description of the jacket. It's a black lightly insulated jacket with a windbreaker like exterior and wiring throughout-the front, back and sleeves are all wired. It zips all the way up to a closed neck (good) and has light elastic cuffs and bottom. There are plenty of extra plugs for gloves and probably heated pants liners too. On the inside left is a pocket that holds the lead to the wiring harness on the bike, and it had an on/off rocker switch when my friend gave it to me. The front outside right has a plasticized H-D patch that is tasteful and I could likely get off if I really wanted to (I no longer own a Harley) and the back center has a 1x2 inch or so Harley eagle and "AN AMERICAN LEGEND" patch sewn on. I'm not sure I'll ever run this jacket without some top layer, so these patches are no big deal.
My first ride in this jacket was Sunday morning, and it was 36 in my garage, 39 per the official weather app on the phone. Jacket warmed up quickly and I could feel the welcome heat at in town speeds. About 10 minutes later I was on the freeway and cruising along for about 25 minutes at California early morning freeway speeds-so plenty of cooling wind. I was wearing an Aerostitch suit, but the top zipper is malfunctioning and opened partway through the ride. No big deal, as the liner kept up and I never was chilled. Riding home at 10 AM I plugged in the liner, so test ride 2 was at more moderate temperatures-roughly high 40s/50ish. This time I had to cycle the liner a few times, as I kept the suit sealed and the liner generated more than enough heat.
Ride three was this morning. Again, the temperature was below 40 when I left the house. I kept the suit sealed better this time, and once I got off the freeway for the last ten minutes riding to work I kept the switch off. I was only wearing a light dress shirt under the liner and could really feel the heat after about a minute, and then for the rest of the ride.
This liner is an XL, which might be one size too big for me (I'm 5'10" and 180) but also allows easy layering under and above, which might not be possible if it was a large. Considering it was a gift, I'm quite happy with the size!
Pro's-plenty of heat, easy hook up to battery then one plug, quality construction
Con's-A bit extra wiring in leads (at least the way my bike is laid out), ripstop outer construction requires outer layer
Friday, December 19, 2014
A small speedbump on the way to 100,000 miles on the Concours
The saga of keeping my 1986 Kawasaki Concours on the road for 100,000 miles keeps adding chapters, detours and speedbumps. After a summer not riding as much as I would have liked due to work-related travel and starting a new business, plus some electrical issues the bike is back on the road. She's running pretty strong with some minor issues related to rubber and gaskets showing their age more and more. Yesterday I realized the trips I had planned for the next two days would easily take the odometer over 97,000 miles-only 3,000 to go!
Until.
Four miles into my ride to lunch at the start of a proposed 55 mile commuting day the speedometer drops to zero as I accelerate onto the freeway. I'm already in fifth and about to click into sixth, tachometer happily bouncing away (it's done that the whole time I've owned the bike once I hit 4200 RPM) but nothing on the speedo. Even worse, the mileage is stuck at 96920.4 miles. Oh no! This has happened a few times before but often resolved by tapping the face of the dash or going over a bump.
TAP TAP TAP. Nothing.
Run over some "zots dots". Nothing.
Find a set of small manhole covers slightly recessed from the roadway once off the freeway. Bumpity bumpity bump. Nothing.
OK, quick diagnosis is either a broken cable (likely, happened to the previous Ninja 900) or dead speedometer (ugh). Yep a dead speedometer would also mean a dead odometer and need for a replacement with who knows what mileage showing.
I got home kind of late last night and decided to troubleshoot this morning. Unscrew fitting from drive gear on front wheel, pull on cable, and knotched end piece and about two inches of cable come right out in my hand. Whew. Quick look at 1994 Connie to see how many parts have to come off to get cable (answer-1, the dash since no side fairings or inner fairing are currently on it). Out come the tools, off comes the inner fairings and the dash from the 86, "steal" the cable from the 94, reverse steps, go riding.
Speedometer/odometer work fine and I rode about 60 miles today. So odometer shows 96980 miles on it. Due to known overstated speed, I'll let the 50 or so miles I rode after the cable broke yesterday slide-not parking this bike right at 100,000 miles anyway.
Wonder if BikeBandit or my local shop sells just the inner cable? Probably almost as much as a replacement on eBay or the Connie forum.
Until.
Four miles into my ride to lunch at the start of a proposed 55 mile commuting day the speedometer drops to zero as I accelerate onto the freeway. I'm already in fifth and about to click into sixth, tachometer happily bouncing away (it's done that the whole time I've owned the bike once I hit 4200 RPM) but nothing on the speedo. Even worse, the mileage is stuck at 96920.4 miles. Oh no! This has happened a few times before but often resolved by tapping the face of the dash or going over a bump.
TAP TAP TAP. Nothing.
Run over some "zots dots". Nothing.
Find a set of small manhole covers slightly recessed from the roadway once off the freeway. Bumpity bumpity bump. Nothing.
OK, quick diagnosis is either a broken cable (likely, happened to the previous Ninja 900) or dead speedometer (ugh). Yep a dead speedometer would also mean a dead odometer and need for a replacement with who knows what mileage showing.
I got home kind of late last night and decided to troubleshoot this morning. Unscrew fitting from drive gear on front wheel, pull on cable, and knotched end piece and about two inches of cable come right out in my hand. Whew. Quick look at 1994 Connie to see how many parts have to come off to get cable (answer-1, the dash since no side fairings or inner fairing are currently on it). Out come the tools, off comes the inner fairings and the dash from the 86, "steal" the cable from the 94, reverse steps, go riding.
Speedometer/odometer work fine and I rode about 60 miles today. So odometer shows 96980 miles on it. Due to known overstated speed, I'll let the 50 or so miles I rode after the cable broke yesterday slide-not parking this bike right at 100,000 miles anyway.
Wonder if BikeBandit or my local shop sells just the inner cable? Probably almost as much as a replacement on eBay or the Connie forum.
Labels:
C10,
commuting,
Concours,
motorcycles,
motorcyle maintenance,
Ninja,
parts,
riding
Wednesday, November 26, 2014
Quick post on total mileage
I found a formula error on my mileage database last night, so when I updated the numbers my average mileage jumped up to nearly 19 miles a day for the past twelve years. I'm also 221 miles short of 85,000 lifetime miles on a variety of bikes. I'll probably do those miles by Sunday between my annual pre-Thanksgiving Dinner ride and other trips. The 1986 Kawasaki Concours went over 96,500 today as I close in on 100,000 total on that bike-it had about 81,000 when I bought it.
Have a great Thanksgiving and hope you can get some riding in if the weather is nice where you are.
Have a great Thanksgiving and hope you can get some riding in if the weather is nice where you are.
Labels:
C10,
Concours,
Kawasaki,
motorcycles,
riding
Tuesday, November 25, 2014
Winter Riding in California and the Start of BikeBandit sales
Yep, it's that time of year again. Winter riding. After suffering through the hot dry summers out here that last until late October-it's routinely 85 plus degrees on Halloween, it's "winter". Or at least the calendar says so.
So your intrepid blogger soldiers on-riding year round and dealing with the brutal hardship of winter riding. Getting on the bike before sun-up requires layers upon layers of clothing, no exposed skin and extra time to ensure the cold battery starts up the nearly 30 year old 1986 Kawasaki Concours, AKA Connie AKA C10 AKA Miss Swail. Off I ride into the brightening sunlight, cold air finding every bit of exposed flesh and tearing through my jeans. Hey, it's probably below 50! C'mon this is brutal.
Then it gets even worse as the sun gets up and by mid-morning it's warming up through the sixties. Now what do I do with all these layers? Fortunately I'm running the sidebags on the Connie so they both fill up with gear and extra clothes. I'll probably make it home before sunset, so I'll probably ride home in my long sleeve shirt and leave the jacket rolled up in a side bag. Yep, it's tough riding in the winter!
All sarcasm aside, it is pretty odd reading about folks taking their "last ride for the winter" and elaborate winterizing procedures. The forums light up with arguments about putting the tires on plywood, cardboard or how often to roll the bike a quarter wheel diameter. Battery in or out? Oil change before AND after storage, or just before? All the while I'm thinking "Just ride it" but then I watch Buffalo get 7 feet of snow (YIKES!) and realize how good I've got it.
So do you need more layers of gear, motorcycling maintenance supplies like I do because you're riding more due to time off, or winterizing oils and tools? No matter what, it's Black Friday and Cyber Monday sales time, and BikeBandit.com is having all kinds of sales starting today. So click on a banner, get anywhere from a 36-90% discount, and get what you need delivered to your door! No need to brave the snow and ice, or crazy commuters-have the parts sent to you. I wonder if they sell tire stud kits? :-)
Labels:
BikeBandit,
commuting,
Concours,
Kawasaki,
motorcycles,
motorcyle maintenance,
parts,
riding,
shop tools
Saturday, November 22, 2014
Update on Kawasaki Concours Main Fairing Bracket Re-welding
I got my Kawasaki Concours main fairing back from my neighbor, and as usual he did a much better job than I anticipated and looks great. Not only did he repair the cracks in the tubing, he cleaned up the old repairs and made triangular pieces to reinforce the corners. He also repainted that area a nice gloss black-covering up the faded and scratched paint and some rust.
While its not really late time wise, I just flew in from the East Coast and three hours "ahead" still. I'll maybe re-install it tomorrow morning, especially if I wake up long before I need to be at church.
I'll also get some photos of the great work Mark did!
While its not really late time wise, I just flew in from the East Coast and three hours "ahead" still. I'll maybe re-install it tomorrow morning, especially if I wake up long before I need to be at church.
I'll also get some photos of the great work Mark did!
Labels:
C10,
Concours,
Kawasaki,
motorcycles,
motorcyle maintenance,
riding
Monday, November 10, 2014
You might be a motorcyclists if....
I rode my 86 Connie to the Starbucks nearest my house this morning to work. I work at Starbucks some days but not for Starbucks, like many people do. So when I finished up and was about to ride home to check for some mail, see who needed lunch and just generally take a break I decided to take advantage of another beautiful Southern California fall day. Yep, nearly perfect weather, so instead of riding the 1.1 miles or so to the house I took my quick loop. Out of Poway on Scripps-Poway Parkway, up 67 north to Poway Road, down the twisty portion of Poway grade then back around to the house. Only about a 13 mile detour and especially nice today. Air was crystal clear, I was the "lead vehicle" down Poway grade (yes!) and got to see the whole family at the house before lunch.
Two quick updates:
It's always going to be something keeping the 1986 on the road to 100K! Now that the electrical gremlins have been found and chased off, the old petcock seems to be seeping a small amount of fuel. Gonna fix that tonight-I've got a few extra petcocks sitting around and am low enough on gas that tilting the tank should allow me to fix it without too much mess.
The BikeBandit Daily Deal page seems to not be updating, but numerous sales continue on the site, especially helmets. Follow a banner ad from this blog and I get a small cut as an affiliate marketer, and a portion of that will go to Movember. Thanks!
Two quick updates:
It's always going to be something keeping the 1986 on the road to 100K! Now that the electrical gremlins have been found and chased off, the old petcock seems to be seeping a small amount of fuel. Gonna fix that tonight-I've got a few extra petcocks sitting around and am low enough on gas that tilting the tank should allow me to fix it without too much mess.
The BikeBandit Daily Deal page seems to not be updating, but numerous sales continue on the site, especially helmets. Follow a banner ad from this blog and I get a small cut as an affiliate marketer, and a portion of that will go to Movember. Thanks!
Labels:
BikeBandit,
C10,
Concours,
Kawasaki,
motorcycles,
motorcyle maintenance,
Movember,
riding
Saturday, November 8, 2014
Lake Elsinore Grand Prix Weekend
This weekend is the kick-off of the desert riding season in Southern California, and what a great way to kick it off with the Lake Elsinore Grand Prix! Revived a few years ago by my friends at Podium Productions, the LEGP is a full weekend of racing in and around Lake Elsinore, a beautiful community just east of Los Angeles and northeast of San Diego. All the different classes of racing are too numerous to list-check their website out. If none of those races interest you, you aren't interested in off-road racing! Beginners, mini's (including tiny tots-some who can barely walk get out there and race!), quads, vintage and yes, off-road sidecars. That's got to be wild, as I've seen track sidecar racing but off-road? And I thought my work was crazy!
Of course, how could you mention SOCAL off-road racing, the Lake Elsinore Grand Prix, and motorcycles and not mention one Harvey Mushman. Some folks use his screen name more often, but Harvey Mushman was a legend in racing circles out in SOCAL and in his honor there will be the Harvey Mushman 100 at 2:15 this afternoon. This is an open race over 100 miles looping in and out of Lake Elsinore. A true test of endurance and a hotly contested event. I bet even Steve McQueen would race in it if he was still around!
If you are in SoCAL this weekend and looking for something to do, head out to Lake Elsinore for the Grand Prix. Some of my Christian Motorcyclists Association (CMA) brothers and sisters will be out there-tell them "Bur" sent you and say "Hi". Have a great weekend whatever kind of riding you are doing and keep it dirty side down.
Of course, how could you mention SOCAL off-road racing, the Lake Elsinore Grand Prix, and motorcycles and not mention one Harvey Mushman. Some folks use his screen name more often, but Harvey Mushman was a legend in racing circles out in SOCAL and in his honor there will be the Harvey Mushman 100 at 2:15 this afternoon. This is an open race over 100 miles looping in and out of Lake Elsinore. A true test of endurance and a hotly contested event. I bet even Steve McQueen would race in it if he was still around!
If you are in SoCAL this weekend and looking for something to do, head out to Lake Elsinore for the Grand Prix. Some of my Christian Motorcyclists Association (CMA) brothers and sisters will be out there-tell them "Bur" sent you and say "Hi". Have a great weekend whatever kind of riding you are doing and keep it dirty side down.
Labels:
Christian Motorcyclists Association,
CMA,
events,
motorcycles,
racing
Tuesday, October 28, 2014
The "joy" of old bikes
Keeping nearly 30 year old bikes on the road takes a mix of ingenuity, patience, spare parts, and sometimes frustration.
I moved parts back over to the 86 Connie last night to get it ready to take to the pros at Poway Motorcycle the local independent shop that works on older bikes. One of the guys there used to ride the Ninja 1000s Connies were made out of, helped pioneer stick coils and is a flat out wizard. So I got everything together, turned the key, cracked the throttle and NOTHING. Grrrr. Check everything, tighten battery terminals (but idiot lights and running lights were already bright). Try again. NOTHING. Hmm, old battery with fresh distilled water in it, but just in case....get battery out of running C10, switch them out, try three. NOTHING. Bike is in neutral, but just in case, let's pull in the clutch lever this time. Slow turning over sounds, no fuel pickup. OK, different problem but had it before-carb bowls likely dried out while the bike sat for a month. Pull everything out of air box, few squirts of starting fluid. Bangy bangy motorcycle noises.
Well, it wasn't that good. This morning I come back from some early morning Bible Study and meetings to run the bike to the shop. Bike barely wants to run, even after more starting fluid. So I spray in some carb cleaner too and it still wants to cough and die. Repeat. Repeat again. Alternate starting fluid and carb cleaner, finally get bike to respond to throttle. Still won't start with clutch lever out, so that switch is likely dead and I'll be looking for a scavenged one in my parts pile tonight.
Good thing some mechanical therapy and frustration is a good change of pace from my normal work frustration, or this would drive me nuts!
I moved parts back over to the 86 Connie last night to get it ready to take to the pros at Poway Motorcycle the local independent shop that works on older bikes. One of the guys there used to ride the Ninja 1000s Connies were made out of, helped pioneer stick coils and is a flat out wizard. So I got everything together, turned the key, cracked the throttle and NOTHING. Grrrr. Check everything, tighten battery terminals (but idiot lights and running lights were already bright). Try again. NOTHING. Hmm, old battery with fresh distilled water in it, but just in case....get battery out of running C10, switch them out, try three. NOTHING. Bike is in neutral, but just in case, let's pull in the clutch lever this time. Slow turning over sounds, no fuel pickup. OK, different problem but had it before-carb bowls likely dried out while the bike sat for a month. Pull everything out of air box, few squirts of starting fluid. Bangy bangy motorcycle noises.
Well, it wasn't that good. This morning I come back from some early morning Bible Study and meetings to run the bike to the shop. Bike barely wants to run, even after more starting fluid. So I spray in some carb cleaner too and it still wants to cough and die. Repeat. Repeat again. Alternate starting fluid and carb cleaner, finally get bike to respond to throttle. Still won't start with clutch lever out, so that switch is likely dead and I'll be looking for a scavenged one in my parts pile tonight.
Good thing some mechanical therapy and frustration is a good change of pace from my normal work frustration, or this would drive me nuts!
Sunday, October 12, 2014
ABS Plasitc bodywork repairs
My 1994 Kawasaki Concours has some damaged bodywork from previous owners having a small wreck and being laid down at low speed. The side panels and the belly pan all had scrapes and damage on them although the paint is in pretty good shape. Since I can't do bodywork and these are old bodywork made out of ABS plastic, I reached out to a friend of mine. He had helped me repair a previous dent and looked forward to trying ABS work.
A few weeks ago we had a planning and evaluation get together. We went to NAPA and looked at options, and the best one was getting fiberglass resin but not use any cloth. Work got in the way for both of us, so we weren't able to get back to the project for too long. So one night he experimented without me. He laid a thin layer of the resin on the damaged areas and let it set up. So yesterday I went over and we looked at the parts in the bright San Diego sun. By "flowing" the resin across the panels the long scrapes were built up and the cracked areas were sealed together. They aren't fuzed like ABS plastic welding would have done but they seem to be stiff enough. He handed me a vibrating sander with 220 grit paper and I went to work on them. I learned a good lesson after hand-sanding all my bikes previously! I'm shopping for a sander soon!
We also cleaned up some areas with a dremel tool and checked the parts back and forth. The usual rule of thumb applies-sand at least 1/3 more time than you think you needed to. The resin worked really well for this project after the first sanding, so Larry mixed up a small patch of the leftover resin and activator. We spread another thin coat on the low spots and set the parts out in the sun. The next step will be to get the parts from Larry's and sand them with both 220 and 400 grit prior to filler priming.
I hate to say it, but Larry is going to make these parts look brand new-which means I'll be crying when they get the road scars I know this bike will! It's stable mate is my 100K project bike and it's definitely picked up it's share of rock chips, scrapes and other "road trophies".
A few weeks ago we had a planning and evaluation get together. We went to NAPA and looked at options, and the best one was getting fiberglass resin but not use any cloth. Work got in the way for both of us, so we weren't able to get back to the project for too long. So one night he experimented without me. He laid a thin layer of the resin on the damaged areas and let it set up. So yesterday I went over and we looked at the parts in the bright San Diego sun. By "flowing" the resin across the panels the long scrapes were built up and the cracked areas were sealed together. They aren't fuzed like ABS plastic welding would have done but they seem to be stiff enough. He handed me a vibrating sander with 220 grit paper and I went to work on them. I learned a good lesson after hand-sanding all my bikes previously! I'm shopping for a sander soon!
We also cleaned up some areas with a dremel tool and checked the parts back and forth. The usual rule of thumb applies-sand at least 1/3 more time than you think you needed to. The resin worked really well for this project after the first sanding, so Larry mixed up a small patch of the leftover resin and activator. We spread another thin coat on the low spots and set the parts out in the sun. The next step will be to get the parts from Larry's and sand them with both 220 and 400 grit prior to filler priming.
I hate to say it, but Larry is going to make these parts look brand new-which means I'll be crying when they get the road scars I know this bike will! It's stable mate is my 100K project bike and it's definitely picked up it's share of rock chips, scrapes and other "road trophies".
Sunday, October 5, 2014
1986 Kawasaki Concours Electrical Gremlin Update
Back home from a week traveling for work and visiting family but not on the bike. Connie battery dead-very little charge. I think I either put this battery in when I bought the bike, or it was in it when I bought it in early 2010. Since the bike sat for two years it's old but also been used. I still haven't found the short or other reason the front headlight won't come on, so I'm going to start by pulling the battery off the 1994, putting it on trickle charge and then prepping to go through the front wiring harness and headlight circuit slowly and painstakingly with a multi-meter.
I have rarely done electrical work, and never this kind of trouble shooting. Ugh.
I have rarely done electrical work, and never this kind of trouble shooting. Ugh.
Labels:
Concours,
Kawasaki,
motorcycles,
motorcyle maintenance,
shop tools
Monday, July 28, 2014
2nd Annual EXTORTION ONE SEVEN Memorial Poker Run Ride Route
This Saturday we will hold the 2nd Annual EXTORTION ONE SEVEN Memorial Poker Run here in San Diego. Last year we had 202 participants and raised $7,000 for the Navy SEAL Foundation and the EOD Warrior Foundation. This year we are hoping for a much larger turn-out and raising even more money for these great charities in honor of the heroes who perished on August 6th, 2011 during the EXTORTION ONE SEVEN mission.
The ride begins at Sweetwater Harley-Davidson in National City CA, with registration at 8:30AM (0830 for the military guys!). Kick stands up (KSU) is 10:00 (again, 1000 hours, there Devil Dog!). The ride ends at the "new" San Diego Harley-Davidson on Morena BLVD, with a short memorial service at 3PM/1500 then the raffle prizes and a band. There will be a high-hand and low-hand prize, raffles including one complete AR-15 and one build kit, knives, gear, range time and a 50/50 drawing.
Looking forward to it but also have a lot to do as a ride committee member!
Here's a link to the route-pretty scenic with a minimum amount of freeway miles! EXTORTION ONE SEVEN Memorial Poker Run Ride Route
The ride begins at Sweetwater Harley-Davidson in National City CA, with registration at 8:30AM (0830 for the military guys!). Kick stands up (KSU) is 10:00 (again, 1000 hours, there Devil Dog!). The ride ends at the "new" San Diego Harley-Davidson on Morena BLVD, with a short memorial service at 3PM/1500 then the raffle prizes and a band. There will be a high-hand and low-hand prize, raffles including one complete AR-15 and one build kit, knives, gear, range time and a 50/50 drawing.
Looking forward to it but also have a lot to do as a ride committee member!
Here's a link to the route-pretty scenic with a minimum amount of freeway miles! EXTORTION ONE SEVEN Memorial Poker Run Ride Route
Labels:
events,
Harley Davidson,
Harley-Davidson,
motorcycles,
riding
Monday, July 21, 2014
And so it begins-new to me CB750 project bike in the storage shed
A friend and his wife recently let me know he had a project bike for a chopper build. Unfortunately he won't be riding anymore, as I met them after he was in a very bad motorcycle wreck. He is being medically retired from the Marines and didn't want to move the bike back across the country and offered it to me. Not wanting to take advantage of his misfortune, I offered to trade for it instead of just picking it up. Saturday I took a Fender 12-string guitar and one of my custom cigar box guitars to their house and picked up the bike parts he had. He threw in some Harley take-off parts, mainly some pipes and heat guards, but I left the quick release parts for Harleys as they could sell those quickly.
What he had was a torn down Honda CB750. While many of the smaller parts were left at their long-term home by the military movers, the main parts are all there. Tight 1976 single overhead cam engine, frame, front forks with wheel and tire, rear tire and sprocket and a few other pieces! Since the rear swingarm and shock weren't included, the first order of business will be either replacing that or getting a weld on hardtail to make it a "roller".
So the bottom line is I own a cruiser again after a month or so of not having one but it's in parts in my storage shed. The plan is to finish restoring the 1994 Connie while riding Miss Swail, my 1986 Connie while planning what the first version of the CB 750 will be and accumulating parts. Next winter I'll assemble the chopper at least to a street legal and running bike, then sort out what to make it into. Initially I'm planning on my standard black rattle can paint job, wrapped pipes and no frills.
I'm guessing it will cost me about another $1000 to get to that point, meaning I'll still be under $1500 since the 12-string was a Craigslist find and the cigar box guitar was probably only $50 in parts or less to make.
Let's get choppin'!
What he had was a torn down Honda CB750. While many of the smaller parts were left at their long-term home by the military movers, the main parts are all there. Tight 1976 single overhead cam engine, frame, front forks with wheel and tire, rear tire and sprocket and a few other pieces! Since the rear swingarm and shock weren't included, the first order of business will be either replacing that or getting a weld on hardtail to make it a "roller".
So the bottom line is I own a cruiser again after a month or so of not having one but it's in parts in my storage shed. The plan is to finish restoring the 1994 Connie while riding Miss Swail, my 1986 Connie while planning what the first version of the CB 750 will be and accumulating parts. Next winter I'll assemble the chopper at least to a street legal and running bike, then sort out what to make it into. Initially I'm planning on my standard black rattle can paint job, wrapped pipes and no frills.
I'm guessing it will cost me about another $1000 to get to that point, meaning I'll still be under $1500 since the 12-string was a Craigslist find and the cigar box guitar was probably only $50 in parts or less to make.
Let's get choppin'!
Saturday, June 28, 2014
2nd Annual EXTORTION ONE SEVEN Memorial Poker Ride is a go!
After a slow start due to some fairly major medical issues for our Committe Chair, we are proud to announce "it's on like Donkey Kong"! This year there are a few big changes-both Sweetwater Harley-Davidson (for the second year) and San Diego Harley-Davidson are hosting start and stop points. We also have a full AR-15 and a mostly complete AR-15 and many other raffle prizes. Route is still being developed but it's going to head east out of Sweetwater HD, hit some crooked roads, ensure everyone gets some smiles per gallon before heading over to SD HD.
All proceeds go to benefit the Navy SEAL Foundation and the EOD Warrior Foundation, two great charities that help out fallen SEAL and EOD techs' families and injured warriors. We will be honoring and memorializing the SEALs, EOD techs, support specialists, aircrew and military working dog that were lost on August 6, 2011 on a mission to aid Army Rangers fighting a much larger number of insurgents in Wardak, Afghanistan. There will be a short observance at the end of the ride to honor these men and K9 who gave their utmost for our freedom and for the people of Afghanistan.
It should be a good ride and event for a great cause. Hope to see you there!
![]() |
| 2nd Annual EXTORTION ONE SEVEN Memorial Poker Run Flyer |
It should be a good ride and event for a great cause. Hope to see you there!
Labels:
events,
Harley Davidson,
Harley-Davidson,
motorcycles
Saturday, May 10, 2014
Just "De-oil" With It and First Ride on new-to-me 1996 Connie
As I got ready for a monster motorcycle maintenance session today, I told my youngest daughter I was going to degrease my 1986 Connie to try to find an oil leak. So we started talking about why the term is degreasing instead of de-oiling, since in most cases we are removing mainly oil but sometimes grease, other lubes, brake and fork fluid, etc. So "de-oiling" became our term, and one of us coined the phrase that is the title of this post-"Just De-oil With It".
The 86 Connie has a pretty consistent oil leak, maybe two, and is really dirty, gritty and nasty on the bottom of the bike from the oil getting everywhere and then picking up road dust, dirt and other junk. Besides not looking good and making the bike probably run a little hotter, it's starting to get on my pants when I ride. I'd like to find the leaks and repair them. Originally I wasn't going to if they had stayed small and I was closer to 100K, but I'm at about 92.6K and the leaks are sometimes pretty bad. So I spent about an hour and a half wiping, cleaning and generally taking care of Miss Swail. The final drive housing, aka the "pumpkin" used to be almost solid black! It appears the leak is coming from the back of the water pump or the alternator shaft, which means a pretty major job. Not routine motorcycle maintenance, but not pulling the bevel gear either!
I also got most the critical parts back on and working on the 1996 Connie. The replacement front brake set isn't bleeding quite right still, but I was dying to take it on a test ride, and needed to get some fuel through the carbs, so I got the main fairing and mirrors back on, suited up and went for a short, conservative test ride, especially since I didn't have much in the way of brakes. I had to cross Miss Swail's tank over, as "Belle's" tank leaks badly in the usual lower "corner" spot. Very difficult to fix, so I may just move the tank over and repaint it when I retire Miss Swail. It also appears the left front fork seal is failing, but I can try a few things and have an upgrade set of springs from the Connie forum.
Over-all a good day and I got a good deal done. I'll look for leaks again tomorrow and see if any are more apparent.
The 86 Connie has a pretty consistent oil leak, maybe two, and is really dirty, gritty and nasty on the bottom of the bike from the oil getting everywhere and then picking up road dust, dirt and other junk. Besides not looking good and making the bike probably run a little hotter, it's starting to get on my pants when I ride. I'd like to find the leaks and repair them. Originally I wasn't going to if they had stayed small and I was closer to 100K, but I'm at about 92.6K and the leaks are sometimes pretty bad. So I spent about an hour and a half wiping, cleaning and generally taking care of Miss Swail. The final drive housing, aka the "pumpkin" used to be almost solid black! It appears the leak is coming from the back of the water pump or the alternator shaft, which means a pretty major job. Not routine motorcycle maintenance, but not pulling the bevel gear either!
I also got most the critical parts back on and working on the 1996 Connie. The replacement front brake set isn't bleeding quite right still, but I was dying to take it on a test ride, and needed to get some fuel through the carbs, so I got the main fairing and mirrors back on, suited up and went for a short, conservative test ride, especially since I didn't have much in the way of brakes. I had to cross Miss Swail's tank over, as "Belle's" tank leaks badly in the usual lower "corner" spot. Very difficult to fix, so I may just move the tank over and repaint it when I retire Miss Swail. It also appears the left front fork seal is failing, but I can try a few things and have an upgrade set of springs from the Connie forum.
Over-all a good day and I got a good deal done. I'll look for leaks again tomorrow and see if any are more apparent.
Labels:
C10,
Concours,
Kawasaki,
motorcycles,
motorcyle maintenance,
shop tools
Sunday, April 13, 2014
John "SoLow Cali" and Anna "Barbie" Event Report
******************************
Update since this post has been searched often recently: Today, 5/1/14, John passed away and at his bequest, his organs were harvested for donation to help others. A large number of family and friends were together at Sharp Hospital. There is a website for donations for final expenses, and there will likely be another ride but this time up in Long Beach. Date is TBD, I'll post info here and on Facebook when I know something.
*******************************
Yesterday in San Diego I was able to participate in a fundraiser for John "SoLow Cali" and Anna "Barbie". The couple was in a bad solo bike wreck a few weeks ago on CA-67, one of our regular riding areas. Both sustained serious injuries and remain hospitalized. They were popular riders in the local sportbike and stunting scene-John even taught bike handling and stunting skills at the routine stunt gathering and both were well-liked.
Family and friends put together a ride, family fest and cook-out, while other events have also been going on. Yesterday morning a huge group of riders, sports car enthusiasts, supporters and family gathered at South Shore Park near Sea World San Diego. There were probably 300 bikes-mainly sportbikes but a few cruisers and at least one fairly pristine Gold Wing 1500 with over 100,000 miles on it! Many clubs rode in as well as lots of independent riders. After a ride brief and a brief pause to let some folks gas up, one of John's family led the ride off in his S2000 sports car and cars and bikes streamed out for nearly 5 minutes. I was there in my "shop truck" as I was hauling the Christian Motorcyclists Association (CMA) bike blessing and hospitality booth supplies, but a few CMA'ers went out on the ride with all the other bikes.
A convoy of 7-8 cars and 1 bike went to Hospitality Point while the ride did a safe and calm freeway loop. For the ride, stunting was prohibited to keep the large number of bikes safely moving through San Diego traffic. The ride lasted about an hour, while we set up our booth and the grills were fired up at the end point. Soon the roar of performance bikes could be heard and the riders arrived at Hospitality Point. There had been one small wreck on the ride when an SUV cut through the line of bikes a little too close, and I think one bike tipped over as they slowed to a crawl entering the end point, but everyone was ok. After a short thank you speech, the food lines formed and folks also bought raffle tickets for the many prizes donated by local businesses. I sampled both the taco truck and the SD Rider Girls chicken skewers-both great, and the hot dog and hamburger line also did brisk business.
Folks from CMA got to bless a few bikes, make some new friends, and even help one rider whose clutch cable decided to fail at the end point. Fortunate for him it happened while he was about to head home instead of on the road! We couldn't make an expedient repair that held enough tension to actually get the bike running, so we loaded his bike in the truck and I was able to get him, his girlfriend and his bike back home. I hope he can get a clutch cable, as it sounded like he's "two wheels only" or T.W.O. like a hardcore biker would be. We're all bikers after all, even if the bikes are different styles. If somehow he finds this page and still needs a clutch cable, click one of the links to BikeBandit-lightening fast shipping to San Diego as most orders are fulfilled here or in a nearby distribution. Plus, as an affiliate marketer, I get a small commission, so thanks for the support!
As I got back to Hospitality Point, the stunters were heading out to the stunt spot, but I was able to return the tie-down straps we had been loaned. I think one of the riders who loaned us a ramp and the tie-downs goes by "Gixxer Girl", so if any of the stunters read this, please pass on a "Thanks Again!" from CMA. I need to reload my tie-downs in the truck!
Keep Praying for SoLow Cali and Barbie-many medical challenges still must be overcome. Be on the lookout for other fundraisers and events, and I hope to see more of these riders at Bike Nights, club events and track days/races.
Update since this post has been searched often recently: Today, 5/1/14, John passed away and at his bequest, his organs were harvested for donation to help others. A large number of family and friends were together at Sharp Hospital. There is a website for donations for final expenses, and there will likely be another ride but this time up in Long Beach. Date is TBD, I'll post info here and on Facebook when I know something.
*******************************
Yesterday in San Diego I was able to participate in a fundraiser for John "SoLow Cali" and Anna "Barbie". The couple was in a bad solo bike wreck a few weeks ago on CA-67, one of our regular riding areas. Both sustained serious injuries and remain hospitalized. They were popular riders in the local sportbike and stunting scene-John even taught bike handling and stunting skills at the routine stunt gathering and both were well-liked.
Family and friends put together a ride, family fest and cook-out, while other events have also been going on. Yesterday morning a huge group of riders, sports car enthusiasts, supporters and family gathered at South Shore Park near Sea World San Diego. There were probably 300 bikes-mainly sportbikes but a few cruisers and at least one fairly pristine Gold Wing 1500 with over 100,000 miles on it! Many clubs rode in as well as lots of independent riders. After a ride brief and a brief pause to let some folks gas up, one of John's family led the ride off in his S2000 sports car and cars and bikes streamed out for nearly 5 minutes. I was there in my "shop truck" as I was hauling the Christian Motorcyclists Association (CMA) bike blessing and hospitality booth supplies, but a few CMA'ers went out on the ride with all the other bikes.
A convoy of 7-8 cars and 1 bike went to Hospitality Point while the ride did a safe and calm freeway loop. For the ride, stunting was prohibited to keep the large number of bikes safely moving through San Diego traffic. The ride lasted about an hour, while we set up our booth and the grills were fired up at the end point. Soon the roar of performance bikes could be heard and the riders arrived at Hospitality Point. There had been one small wreck on the ride when an SUV cut through the line of bikes a little too close, and I think one bike tipped over as they slowed to a crawl entering the end point, but everyone was ok. After a short thank you speech, the food lines formed and folks also bought raffle tickets for the many prizes donated by local businesses. I sampled both the taco truck and the SD Rider Girls chicken skewers-both great, and the hot dog and hamburger line also did brisk business.
Folks from CMA got to bless a few bikes, make some new friends, and even help one rider whose clutch cable decided to fail at the end point. Fortunate for him it happened while he was about to head home instead of on the road! We couldn't make an expedient repair that held enough tension to actually get the bike running, so we loaded his bike in the truck and I was able to get him, his girlfriend and his bike back home. I hope he can get a clutch cable, as it sounded like he's "two wheels only" or T.W.O. like a hardcore biker would be. We're all bikers after all, even if the bikes are different styles. If somehow he finds this page and still needs a clutch cable, click one of the links to BikeBandit-lightening fast shipping to San Diego as most orders are fulfilled here or in a nearby distribution. Plus, as an affiliate marketer, I get a small commission, so thanks for the support!
As I got back to Hospitality Point, the stunters were heading out to the stunt spot, but I was able to return the tie-down straps we had been loaned. I think one of the riders who loaned us a ramp and the tie-downs goes by "Gixxer Girl", so if any of the stunters read this, please pass on a "Thanks Again!" from CMA. I need to reload my tie-downs in the truck!
Keep Praying for SoLow Cali and Barbie-many medical challenges still must be overcome. Be on the lookout for other fundraisers and events, and I hope to see more of these riders at Bike Nights, club events and track days/races.
Wednesday, February 5, 2014
She isn't the "Belle of the Ball"-at least not yet
Today during a break from work I chanced a quick look at Craigslist, and lo and behold there was a 1994 Kawasaki Concour for sale. FOR $500! Quickly opened the listing, looked at the photos and started dialing.
The goods: Complete. Runs. Registered/clean title. Antlers and windshield not pictured are available and part of the deal (about $100 in parts right there)
The bads: Been laid down and patched up, but still rough body parts and the usual cracks around the turn signals these bikes are known for. Leaking gas tank. Front end needs total rebuild-fork seals, brake calipers-the works.
Well, since I still have just under 9500 miles to get Miss Swail (my current 86 Connie) over 100K, I can take my time doing this work right and have a low mileage 1994 for probably trade-in value when all is said and done.
Plan is to pick her up tomorrow, give the bike a good going over/cleaning before my next work trip, and start the restoration while piling up the miles on Miss Swail. Hopefully later this summer have "Belle" fixed up and sharing the miles.
Here's a pic:
The goods: Complete. Runs. Registered/clean title. Antlers and windshield not pictured are available and part of the deal (about $100 in parts right there)
The bads: Been laid down and patched up, but still rough body parts and the usual cracks around the turn signals these bikes are known for. Leaking gas tank. Front end needs total rebuild-fork seals, brake calipers-the works.
Well, since I still have just under 9500 miles to get Miss Swail (my current 86 Connie) over 100K, I can take my time doing this work right and have a low mileage 1994 for probably trade-in value when all is said and done.
Plan is to pick her up tomorrow, give the bike a good going over/cleaning before my next work trip, and start the restoration while piling up the miles on Miss Swail. Hopefully later this summer have "Belle" fixed up and sharing the miles.
Here's a pic:
![]() |
| New to me 1994 Kawasaki Concours "Belle" |
Labels:
Concours,
Kawasaki,
motorcycles,
motorcyle maintenance,
riding
Subscribe to:
Posts (Atom)



